User Manual

GX1600Page 76
10.11 SOFT KEYS
This menu item assigns the number of soft keys, soft key selection and how
long the display will show the soft key icon after a soft key is pressed.
10.11.1 Selecting the Number of Soft Keys
1. Press and hold down the key until “Setup
Menu” appears, then select “GENERAL SETUP”
with the / key.
2. Press the soft key, then press the
/ key to “SOFT KEYS”.
3. Press the soft key, then press the
/ key to “NUMBER OF SOFT KEYS”.
4. Press the soft key, then press the
/ key to select the number of soft
keys (3 through 10).
5. Press the soft key to store the selected set-
ting.
6. Press the soft key several times to return to radio operation.
10.11.2 Assigning Soft Keys
1. Press and hold down the key until “Setup
Menu” appears, then select “GENERAL SETUP”
with the / key.
2. Press the soft key, then press the
/ key to “SOFT KEYS”.
3. Press the soft key, then press the
/ key to select “KEY ASSIGNMENT”
(to change the use of selected soft keys).
4. Press the soft key, then press the
/ key to select the key (“KEY1”,
“KEY2”, or “KEY3”).
5. Press the soft key, then press the /
key to select the new function to be as-
signed, and press the soft key. Available functions are listed below.
DISPLAY
SCAN
DW
IC
CMP: COMPASS
WPT
PRESET
WX
MARK
PRESET 0 - 9
FUNCTION
Starts and stops Scanning.
Starts and stops Dual Watch Scan.
Activates Intercom between radio and RAM3 mic (optional RAM3 required).
Shows to the “Compass” display.
Shows to the “Waypoint” Navigation display.
Saves or deletes the preset memory channel.
Immediately recalls the last select the weather channel.
Marks the current position for a “Waypoint”.
Immediately recalls the Preset Memory Channel.