User Manual

GX1600Page 88
13.5 SAVING A DSC POSITION CALL AS A WAYPOINT
When a DSC POSITION REPORT call is received from a another DSC radio
the GX1600 allows the position to be saved as a waypoint.
1. After a position has been received, press the
soft key.
2. The first digit in the WPT Name will be flashing, press
the / key to the first letter of the name you
want to input.
3. Press the soft key, then press the /
key to select the second letter in the name.
4. Repeat step 3 until the name is shown.
5. Press and hold the soft key to save the
waypoint to memory and return to radio operation.
13.6 NAVIGATING TO A SAVED WAYPOINT
1. Press and hold down the key until “Setup
Menu” appears.
2. Press the / key to select “GENERAL
SETUP”.
3. Press the soft key, then select “DIS-
PLAY” with the / key.
4. Press the soft key, and select
“WAYPOINT”, and press the soft key.
5. Select the waypoint name and press the
soft key to show the waypoint data
display.
6. Press the soft key to start navigating
the waypoint and show the Waypoint Nav display.
NOTE
The radio must be connected to a GPS to be able to navigate to a
waypoint.