User Manual

Page 109
GX1600/GX1700
PTT (Push-To-Talk) Key
Push this key to enable the transmitter.
(
POWER
)
Key
Press and hold this key to turn the transceiver and the remote micro-
phone on or off.
MICROPHONE
The internal ClearVoice Noise Canceling microphone is located here.
When transmitting, position your mouth about 1/2 to 1 inch (1.2 ~ 2.5 cm)
away from the small microphone hole. Speak slowly and clearly into the
microphone.
DISPLAY
Full dot matrix display.
SOFT KEY
These three key’s functions can be customized by the setup menu mode.
When pressing one of these keys briey, the key functions will appear
at the bottom of the display. Refer to section “15.2 ASSIGNING SOFT
KEYS” for details.
KEY PAD
Key
Press this key to access the DSC menu.
Press and hold this key to access the setup menu.
Key
First press: Channel 16 is immediately selected.
Second press: recalls the last selected channel.
Press and hold: selects Channel 9.
(
UP
)
/
(
DOWN
)
Key
These keys are used to select channels, adjust the volume and
squelch level, and to choose DSC calls, DSC setup and general setup
function.
Key (Volume Control / Squelch Control)
First press: volume adjustment mode
Second press: squelch adjustment mode
Third press: exits adjustment mode
When in volume or squelch mode, press the
or key to adjust the
level.
Key
Press to CLEAR a function or menu selection. Press and hold to select