User Manual

Page 83
GX1600/GX1700
10.4 UNIT OF MEASURE
Allows navigation displays to be shown in “Knot”, “Mile/Hour” or “Kilo-Meter/
Hour” (for speed), “Nautical Mile” or “Kilo-Meter” (for distance), and “Feet” or
“Meter” (for altitude).
NOTE
GPS x from the internal antenna (GX1700) or a NMEA signal from
an external GPS or chart plotter must be received.
1. Press and hold the key until “
Setup Menu
”
appears, then select “
GENERAL SETUP
” with the
/ key.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
)GPGTCN5GVWR/GPW
&KOOGT
&KURNC[
%QPVTCUV
-G[ $GGR
5VCVKQP 0COG
70+6 1( /'#574'
37+6
5'.'%6
-Unit of Measure-
Distance
Altitude
SPEED
QUIT
SELECT
-Speed Unit-
MPH:Mile/Hour
KMH:Kilo-Meter/Hour
KTS:KNOTS
QUIT
ENT
2. Press the soft key, then press the
/ key to select “
UNIT OF MEASURE
”.
3. Press the
soft key.
4. Press the
/ key to select “
SPEED
”,
“
DISTANCE
”, or “
ALTITUDE
” which you wish to
change.
5. Press the
soft key, then press the
/ key to select desired unit. Available selec-
tions are KTS (knot), MPH (Mile/Hour), or KMH
(Kilo-Meter/Hour) for speed, NM (Nautical Mile),
SM (Statute Mile) or KM (Kilo-Meter) for distance,
and FT (feet) or M (Meter) for altitude.
6. Press the
soft key to store the selected
setting.
7. Press the
soft key three times to return to radio operation.