User Manual
GX1600/GX1700
Page 26
7 CONTROLS AND INDICATORS
NOTE
This section denes each control of the transceiver. For operating
instructions refer to section “8 BASIC OPERATION”.
7.1 FRONT PANEL
Note: The gure above shows the outline of the GX1700.
/ Keys
The
/ keys are used to select channels and to choose menu
items (such as the DSC menu, General Setup and DSC Setup menu).
/ keys on the microphone can also be used to select channels
and menu items.
SecOnDary uSe
While holding down the soft key and pressing / key,
you can conrm memory channels that have been programmed for scan-
ning.
Key
Press the
key briey to recall channel 16 from any channel.
Press and hold the key to recall channel 9. Pressing the key
again reverts to the previous selected working channel.
Key
Turns the transceiver on and off. To turn the transceiver on, press and
hold this key until the LCD turns on. To turn it off, press and hold this key
until the LCD turns off. When the power is turned on, the transceiver is
set to the last-selected channel.