User Manual

GX1600/GX1700
Page 70
9.8.7 Stopping Navigation to a Saved Waypoint
1. Press and hold the key until “
Setup
Menu
” appears.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
)GPGTCN5GVWR/GPW
&KOOGT
%QPVTCUV
-G[ $GGR
5VCVKQP 0COG
7PKV QH /GCUWTG
&+52.#;
37+6
5'.'%6
-Display-
Compass
Waypoint
GPS Status
NORMAL
QUIT
ENT
P-CH
12:56
LOC AM
25W USA
N
W
DISTRESS
33 37.120
118 09.580
2. Select “
GENERAL SETUP
” with the /
key.
3. Press the
soft key.
4. Select “
DISPLAY
” with the
/ key,
and press the soft key.
5. Select “
NORMAL
” with the
/ key, and
press the soft key.
9.8.8 Setting up the Position Report Ringer
The GX1600 and GX1700 have the capability to turn off the position report
ringer.
1. Press and hold the
key until “
Setup
Menu
” appears.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
-Setup Menu-
CH Function Setup
GPS Setup
MMSI Setup
Waypoint Setup
QUIT
SELECT
General Setup
DSC SETUP
-DSC Setup-
Position Reply
Individual Ack
Individual Ring
Group Directory
Auto POS Interval
DSC BEEP
QUIT
SELECT
-DSC Beep-
POS Report
Beep
On
Select Call
QUIT
ENT
-DSC Beep-
POS Report
Beep
Off
Select Call
QUIT
ENT
2. Press the / key to select “
DSC
SETUP
” menu.
3. Press the
soft key, then select “
DSC
BEEP
” with the / key.
4. Press the
soft key, then select “
POS
Report
” with the / key.
5. Press the
soft key, then select “
Off
”
with the / key.
6. Press the
soft key to store the
selected setting.
7. Press the
soft key three times to
return to radio operation.
To re-enable the ringer tone, repeat the above procedure, pressing the
/ key to select “
On
” in the step 5 above.