User Manual

Page 85
GX1600/GX1700
10.7 STATION NAME
This function allows you to change the name of the radio or RAM3+ second
station microphone. Example: “Radio - Cabin”, “RAM1 - Flybridge”.
1. Connect the RAM3+ second station microphone
to the GX1600 or GX1700.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
)GPGTCN5GVWR/GPW
&KOOGT
&KURNC[
%QPVTCUV
-G[ $GGR
7PKV QH /GCUWTG
56#6+10 0#/'
37+6
5'.'%6
-Station Name-
Radio
Unit Name
RADIO
Select Unit
QUIT
ENT
-Station Name-
Radio
Unit Name
CADIO
Select Unit
QUIT
ENT BACK
-Station Name-
Radio
Unit Name
Cabin
Select Unit
QUIT
ENT BACK
2. Press and hold the key until “
Setup Menu
”
appears, then select “
GENERAL SETUP
” with the
/ key.
3. Press the
soft key, then press the
/ key to select “
STATION NAME
”.
4. Press the
soft key.
5. Press the
/ key to select the unit (“
Radio
”
or “
RAM1
”) to be named, then press the
soft key.
6. Press the
/ key to scroll through the rst
letter of the new channel name.
7. Press the
soft key to store the rst letter
in the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is completed.
The name can consist of up to 8 characters, if you
do not use all 8 characters press the
soft
key to move to the next space. This method can
also be used to enter a blank space in the name.
If a mistake was made entering in the name
repeat pressing the key until the wrong
character is selected, then press the /
key to correct the entry.
9. Press and hold the
soft key to enter the name.
10. If you want to enter the name of the connected RAM3+ or radio, repeat
steps 5 through 9.
11. Press the
soft key several times to return to radio operation.