User Manual

Page 87
GX1600/GX1700
DISPLAY FUNCTION
SCAN Starts and stops scanning.
DW Starts and stops dual watch scan.
IC Activates intercom between radio and RAM3+ mic (optional RAM3+ required).
CMP: COMPASS Shows to the “Compass” display.
WPT Shows to the “Waypoint” navigation display.
PRESET Saves or deletes the preset memory channel.
WX Immediately recalls the last select the weather channel.
MARK Marks the current position for a “Waypoint”.
PRESET 0-9 Immediately recalls the preset memory channel.
6. Repeat steps 4 and 5 to program the other soft keys. The factory
defaults are Key 1: , Key 2: , and Key 3: function.
7. Press the
soft key to store the selected setting.
8. Press the
soft key three times to return to radio operation.
10.8.3 Selecting How Long the Soft Keys are Shown
1. Press and hold the key until “
Setup
Menu
” appears, then select “
GENERAL
SETUP
” with the / key.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
)GPGTCN5GVWR/GPW
&KOOGT
%QPVTCUV
5VCVKQP 0COG
-G[ $GGR
7PKV QH /GCUWTG
51(6 -';5
37+6
5'.'%6
5QHV -G[U
-G[#UUKIPOGPV
0WODGT QH 5QHV -G[U
-';6+/'4
37+6
5'.'%6
-G[6KOGT
 UGE
 UGE
 UGE
 UGE
 UGE
5'%
37+6
'06
2. Press the soft key, then press the
/ key to “
SOFT KEYS
”.
3. Press the
key, then press the
/ key to select “
KEY TIMER
” (selects
how long the soft key icon will be shown
on the display after a soft key is pressed,
default is 4 seconds). Then, press the
soft key.
4. Press the
/ key to select the time.
5. Press the
soft key to store the selected setting.
6. Press the
soft key three times to return to radio operation.