User Manual
GX1600/GX1700
Page 98
13.2 ADDING A WAYPOINT
1. Press and hold the key until “
Setup Menu
”
appears.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
General Setup
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
WAYPOINT SETUP
QUIT
SELECT
QUIT
SELECT
-Waypoint Setup-
WAYPOINT DIRECTORY
Display Range
Direction
QUIT
SELECT
-Waypoint Directry-
ADD
Mark Position
Edit
Delete
QUIT
ENT BACK
-Waypoint Input-
Position: -- --.---_
ID:---------
--- --.---_
WPT Name:WPT 002
2. Press the / key to select “
WAYPOINT
SETUP
”.
3. Press the
soft key, then select “
WAYPOINT
DIRECTORY
” with the / key.
4. Press the
soft key, then select “
ADD
” with
the / key.
5. Press the
soft key.
6. Enter the waypoint name by pressing the
/ key to select the rst letter.
Note: The GX1600 and GX1700 assign a name
of the waypoint with “
WPT xxx
” automatically.
7. Press the
soft key to store the rst letter
and to move to the second letter in the name.
8. Repeat step 6 and 7 until the name is shown.
Press the
soft key to skip a letter if need-
ed.
9. Press and hold the
soft key, then enter the
coordinates of the waypoint position, by pressing
the / key to select the first digit in the
latitude.
10. Press the
soft key to store the rst number and to move to the
second number in the position.
11. Repeat step 9 and 10 until the latitude is shown including N or S in the
last digit.
12. Press the
soft key to select the rst digit of the longitude is blink-
ing.
13. Press the
/ key to select the rst digit in the longitude.
14. Press the
soft key to store the rst number and to move to the
second number in the position.
15. Repeat step 13 and 14 until the longitude is
shown including E or W in the last digit.
QUIT
ENT BACK
-Waypoint Input-
ID:123456789
Position: 33 36.520N
118 10.120W
WPT Name:Fishing PT
16. After all information is entered, press and hold the
soft key to store the waypoint into memo-
ry.
17. Press the
soft key three times to return to radio operation.