User Manual

Page 15HX400
4.3.3 BATTERY CHARGING
1. Turn the transceiver off.
2. Insert the DC plug from the PA-45B into
the DC jack on the CD-50 side panel,
then plug the PA-45B into the AC line
outlet.
3. Insert the HX400 (with the battery pack)
into the CD-50; the antenna should be
at the left side when viewing the charger
from the front.
4. If the HX400 is inserted correctly, the Red
“CHARGING” indicator will glow. A fully-
discharged pack will be charged com-
pletely in approximately 3 hours.
5. When charging is completed, the red
LED indicator will change to green. Re-
move the transceiver from the CD-50,
and unplug the PA-45B from the AC line outlet.
CAUTION
The CD-50 cradle is NOT designed to be waterproof. Do not attempt to
charge in water hazardous locations.
NOTE
The CD-50 cradle is only designed for the charging of the HX400’s bat-
tery, and is not suitable for other purposes. The CD-50 may contribute
noise to TV and radio reception in the immediate vicinity, so we do not
recommend its use adjacent to such device.
PA-45B
CD-50