User Manual

Page 29HX400
DUAL WATCH MODE
Function: Selects dual or tri-watch as desired.
Available Values: t- (Tri Watch) / d- (Dual Watch)
Default: d- (Dual Watch)
t- (Tri Watch): The radio watches the activity of CH16,
CH9, and the current channel.
d- (Dual Watch): The radio watches the the activity of the current channel and
the Priority channel.
DIMMER MODE
Function: Selects the display brightness level.
Available Values: 0 / 1 / 2 / 3
Default: 3
WX ALERT MODE
Function: Enables/Disables the NOAA Weather Alert func-
tion.
Available Values: on / oFF
Default: on
DUAL WATCH DISPLAY
Function: Selects the display mode while Dual Watch scan-
ning.
Available Values: nor (Normal) / SPC (Special)
Default: nor (Normal)
When this menu is set to “Normal”, the channel numbers during dual watch will
be shown scrolling on the display. When “Special” is selected the channel
numbers on the display do not change unless a call was received. The chan-
nel shown is the last channel that was received. This is a handy feature if you
cannot look at the radio the moment a transmission was received.
SCAN DISPLAY
Function: Selects display mode while scanning.
Available Values: nor (Normal) / SPC (Special)
Default: nor (Normal)
When this menu is set to “Normal”, the channel numbers
during dual watch will be shown scrolling on the display.
When “Special” is selected the channel numbers on the display do not change
unless a call was received. The channel shown is the last channel that was
received. This is a handy feature if you cannot look at the radio the moment a
transmission was received.