User Manual

HX400IS
Page 16
Key
Press the key momentarily to increase the channel one step. Hold the
key down to increase the channel continuously.
Secondary use:
Used to adjust the squelch threshold level up after the key is pressed.
Key
Press the key momentarily to decrease the channel one step. Hold the
key down to decrease the channel continuously.
Secondary use:
Used to adjust the squelch threshold level down after the key is pressed.
Key
Press this key to activate the squelch adjusting mode. Press the or
key to adjust the squelch threshold level.
Secondary use:
Press and hold this key for two seconds to open the squelch, allowing
you to monitor the operating channel. Release the key to resume normal
(quiet) monitoring.
Key
Starts scanning and priority scanning of programmed channels.
Secondary use:
Press and hold the key for two seconds to activate the Dual Watch feature.
Key
Press to stop the Scan, Priority Scan, or Dual Watch feature.
Secondary use:
Press and hold this key to immediately recall the last-used NOAA Weath-
er Channel from any channel location. Recalls the previously- selected
working channel when the key is pressed again.
Advanced use:
When the key is held and the key is pressed, the radio will
change the marine band between the USA, International, and Canadian
channels.
Speaker
The internal speaker is located here.
Microphone
The internal microphone is located here.
When transmitting, position your mouth 1 inch (2.5 cm) away from the
small mic hole. Speak slowly and clearly into the microphone.
Battery Pack Lock
(
Bottom side
)
Slide the Battery Pack Lock to the “

” position for battery removal.