User Manual

HX400IS
Page 28
CH NAME
Function: Changes the channel name shown on the dis-
play.
To change the channel name:
1. Select the channel you wish to change the name be-
fore following the steps below.
2. Turn off the HX400IS by rotating the VOL knob counter clockwise.
3. Hold down the
key, then turn on the transceiver while still holding
down the key.
4. Press the or key to select “
CH NAME
”.
5. Press the key. The current channel name will appear on the upper
left corner of the display.
6. Press the or key to select the rst character (letter, number, or
symbol) in the name, then press the key to move to the next charac-
ter.
7. Repeat step 6 as many times as necessary to complete the name tag (up
to 12 characters).
8. After completing your adjustment, press the key to save the new set-
ting.
9. Press the key to exit to normal operation.
MEM CH
Function: Programming Scan Memory.
See page 24 for details of the programming.
SCRAMBLER
Function: Enables/Disables the Voice Scrambler and se-
lects its scramble code.
Available Values: oFF / SC0 / SC1 / SC2 / SC3
Default: oFF
NOISE CANCEL
Function: Enables/Disables the Noise Canceling Micro-
phone.
Available Values: on / oFF
Default: on