Operation Manual

Page 13GX3000S
8.7 CHANGING COG TO TRUE OR MAGNETIC
Allows customizing the NAV data showing GPS Course Over Ground (COG).
Factory default is True however following the steps below the COG can be
changed to Magnetic.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
MagneticMagnetic
MagneticMagnetic
Magnetic” with the
CHANNEL selector knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “
OnOn
OnOn
On” (rep-
resenting “Magnetic”) or “
OffOff
OffOff
Off” (representing “True”).
5. Press the
[
ENT
]
key to store the selected setting.
6. Turn the CHANNEL selector knob to select “
ExitExit
ExitExit
Exit,”
then press the
[
ENT
]
key to return to the “
RadioRadio
RadioRadio
Radio
SetupSetup
SetupSetup
Setup
” menu, select “
ExitExit
ExitExit
Exit” and press the
[
ENT
]
key
to return to radio operation.
8.6 CHANGING THE TIME LOCATION
Sets the radio to show UTC time or local time with the offset inputted in section
8.5 Changing the GPS Time.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
Time DispTime Disp
Time DispTime Disp
Time Disp” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “
UTCUTC
UTCUTC
UTC” or
“
LocalLocal
LocalLocal
Local.”
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
In the local time mode, the display shows the time by the 12-hour system.
Meanwhile, the display shows the time by the 24-hour system in the UTC
mode.
(
“LOCAL” mode
)(
“UTC” mode
)