Operation Manual

GX3000SPage 42
Repeat this procedure until all nine space of the MMSI number are en-
tered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the
[
H/L
(
NAV
)]
key until the wrong character is selected, then
move the channel knob to correct the entry.
12. To store the data entered, press and hold the
[
ENT
]
key.
13. To enter another individual address, repeat steps 4
through 12.
14. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
NOTE
Selecting “
NextNext
NextNext
Next” or “
ExitExit
ExitExit
Exit” will automatically save the name and MMSI
number into memory.
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When Manual is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “
DSCDSC
DSCDSC
DSC
SetupSetup
SetupSetup
Setup
” menu.
3. Press the
[
ENT
]
key, then select “
INDIV ReplyINDIV Reply
INDIV ReplyINDIV Reply
INDIV Reply” with
the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select “
AutoAuto
AutoAuto
Auto”
or “
ManualManual
ManualManual
Manual.”
6. Press the
[
ENT
]
key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.