Operation Manual

GX3000SPage 46
11.5.5 Receiving an Individual Call
When the GX3000S receives a individual call, by default the GX3000S auto-
matically transmits a acknowledgement before switching to the requested chan-
nel. The GX3000S can be set so the GX3000S prompts you to manually send
a reply, refer to section “11.5.2 Setting up Individual Reply.”
1. When an individual call is received, an individual call
ringing alarm sounds.
2. Press any key to stop the alarm.
3. Turn the CHANNEL selector knob to see the MMSI
of the vessel transmitting the Individual Call.
4. Press the
[
ENT
]
key to change the operating chan-
nel to the requested channel (To cancel, press the
[
CLR
]
key).
5. Press the PTT on the mic and talk to the calling ship.
11.6 CALL WAITING DIRECTORY
The GX3000S logs received distress calls and individual calls. The DSC Call
Waiting feature is similar to an answer machine where calls are this recorded
logs for review. When a call is logged while the radio is set
on the DSC Standby function, a message will appear on
the LCD. The GX3000S can be memorized up to the lat-
est 23 Distress and up to the latest 56 Distress Call.
11.6.1 Enabling the Call Waiting Feature
Follow the steps below to enable or disable the Call Waiting feature.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “
DSCDSC
DSCDSC
DSC
SetupSetup
SetupSetup
Setup
” menu.
3. Press the
[
ENT
]
key, then select “
INDIV ACKINDIV ACK
INDIV ACKINDIV ACK
INDIV ACK” with
the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select “
AbleAble
AbleAble
Able”
or “
UnableUnable
UnableUnable
Unable.”
6. Press the
[
ENT
]
key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.