Operation Manual

Page 49GX3000S
6. Turn the CHANNEL selector knob to scroll through
the first letter of the name of the vessel or person
you want to reference in the directory.
7. Press the
[
ENT
]
key to store the first letter in the
name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete. The
name can consist of up to eleven characters, if you
do not use all eleven characters press the
[
ENT
]
key to move to the next
space. This method can also be used to enter a blank space in the name.
To clear the previous letter, press the
[
CLR
]
key.
9. After the eleventh letter or space has been entered,
press and hold the
[
ENT
]
key to advance to the MMSI
(Maritime Mobile Service Identity Number) number
entry.
10. Turn the CHANNEL selector knob to scroll through numbers, 0-9. To enter
the desired number and move one space to the right press the
[
ENT
]
key.
Repeat this procedure until all nine space of the MMSI number are entered.
11. If a mistake was made entering in the name or the
MMSI number repeat pressing the
[
H/L
(
NAV
)]
key
until the wrong character is selected, then move the
channel knob to correct the entry.
12. To store the data entered, press and hold the
[
ENT
]
key.
13. To enter another individual address, repeat steps 4 through 12.
14. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
11.7.2 Transmitting a Group Call
Pre-Programmable Calling
1. Press the
[
CALL
(
MENU
)]
key. The “
DSC OperationDSC Operation
DSC OperationDSC Operation
DSC Operation”
menu will appear.
2. Turn the CHANNEL selector knob to select “
GroupGroup
GroupGroup
Group.”
(To cancel, select “
ExitExit
ExitExit
Exit” with the CHANNEL selector
knob or press
[
16/9
]
key.)
3. Press the
[
ENT
]
key. The transceiver will beep, and
the “
Group DirectoryGroup Directory
Group DirectoryGroup Directory
Group Directory” will appear.
4. Turn the CHANNEL selector knob to select the
“
GroupGroup
GroupGroup
Group” you want to contact.
5. Press the
[
ENT
]
key, then turn the CHANNEL selec-
tor knob to select the operating channel you want to
communicate on and press the
[
ENT
]
key.
6. Press the
[
ENT
]
key again to transmit the Group Call
signal.