Operation Manual

Page 57GX3000S
Manual Calling
1. Press the
[
CALL
(
MENU
)]
key. The “
DSC OperationDSC Operation
DSC OperationDSC Operation
DSC Operation”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “
POSPOS
POSPOS
POS
SendSend
SendSend
Send
.”
3. Press
[
ENT
]
key to show the Position Send direc-
tory. This directory uses the INDIVIDUAL Directory
information.
4. Turn the CHANNEL selector knob to select “
ManualManual
ManualManual
Manual,”
then press the
[
ENT
]
key.
5. Enter the MMSI number (nine digits) which you want
to contact, then press the
[
ENT
]
key.
6. Press the
[
ENT
]
key to send your position to the se-
lected vessel.
11.9.3 Receiving a DSC Position Send Call
When another vessel transmits their location to the GX3000S, the following
will happen:
1. A ringing sound will be produced when the call is received.
2. Press the
[
16/9
]
key to stop ringing
3. The position from the calling vessel will be shown on the display of the
radio and also transferred to any Standard Horizon GPS Chart plotter if
connected.