Manualshelf

Operation Manual

ManualsBrandsStandard Horizon ManualsMarine RadioMATRIX GX3000S
61626364656667686970
Page 67GX3000S
12.14 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
FOG Freq.FOG Freq.
FOG Freq.FOG Freq.
FOG Freq.” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select desired
tone frequency.
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
12.15 RECEIVER AUDIO TONE CONTROL
Allows the treble and bass of the speaker audio to be adjusted for best listen-
ing in noisy enviroments. The effect is similar to adjusting a the treble and bass
controls on a stereo.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
TONETONE
TONETONE
TONE
CONT.CONT.
CONT.CONT.
CONT.
” in the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the
CHANNEL selector knob.
3. Press the
[
ENT
]
key, then select “
BASSBASS
BASSBASS
BASS” with
the CHANNEL selector knob.
4. Turn the CHANNEL selector knob to select
desired audio responce in the lower frequency
range. Available selections are “
––
––
–
66
66
6
” through “
+6+6
+6+6
+6.”
5. Press the
[
ENT
]
key to store the selected setting.
6. Select “
TREBLETREBLE
TREBLETREBLE
TREBLE” with the CHANNEL selector
knob.
7. Turn the CHANNEL selector knob to select
desired audio responce in the highr frequency
range. Available selections are “
––
––
–
66
66
6
” through “
+6+6
+6+6
+6.”
8. Press the
[
ENT
]
key to store the selected setting.
9. To exit this menu and return to radio operation mode press the
[
16/9
]
key.