Operation Manual

GX3000SPage 72
13.4 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “11
DIGITAL SELECTIVE CALLING” and section “12 RADIO SETUP MODE” for
details). The
LAMPLAMP
LAMPLAMP
LAMP,
CONTRASTCONTRAST
CONTRASTCONTRAST
CONTRAST, and
KEY BEEPKEY BEEP
KEY BEEPKEY BEEP
KEY BEEP menu item accessed from the
RAM+ only controls the RAM+’s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the
[
CALL/SET
]
key until “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu ap-
pears.
2. Press the
[
S
]
/
[
T
]
key to select “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” or “
DSC SETUPDSC SETUP
DSC SETUPDSC SETUP
DSC SETUP” menu.
3. Press the
[
CALL/SET
]
key, then select the menu item you wish to work on
by pressing the
[
S
]
/
[
T
]
key.
4. Press the
[
CALL/SET
]
key.
5. Press the
[
S
]
/
[
T
]
key to change the value or condition for the menu item,
then press the [CALL/SET] key to save the new setting.
6. Press the
[
S
]
/
[
T
]
key to select “
EXITEXIT
EXITEXIT
EXIT,” then press the
[
CALL/SET
]
key to
return to the normal operation.
RADIO SETUP-menu DSC SETUP-menu
NOTE
When setup menu is selected, the GX3000S will be temporarily dis-
abled until the RAM+ mic, exits from the setup mode.