VersiVision FVT1000/FVR1000 Series Fiber Optic Video Modems Technical Manual Also covers FVR1000M modules Copyright Aug 2005 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.
PROPRIETARY DATA All data in this manual is proprietary and may not be disclosed, used or duplicated, for procurement or manufacturing purposes, without prior written permission by VERSITRON, Inc. WARRANTY All VERSITRON products are warranted against defects in materials and workmanship for one year from date of delivery. We will repair or, at our option, replace parts, which during normal usage prove to be defective during the warranty period provided that: 1.
TABLE OF CONTENTS SECTION 1: GENERAL DESCRIPTION INTRODUCTION…………………………………………………………………..4 DESCRIPTION OF EQUIPMENT…………………………………………………4 Functional Characteristics…………………………………………4 Physical Characteristics...................................................................5 SPECIFICATIONS………………………………………………………………5-6 SECTION 2: INSTALLATION INSTRUCTIONS INSTALLATION PROCEDURE………………………………………………….
SECTION 1 DESCRIPTION OF EQUIPMENT INTRODUCTION This manual provides information on the installation and operation of the VersiVision FVT1000/FVR1000 Series Fiber Optic Video Modems. Section 1 contains a general description of the equipment. Section 2 contains installation instructions. Section 3 contains maintenance and troubleshooting information.
Physical Characteristics The VersiVision FVT1000 transmitter and FVR1000 receiver modems are available as standalone devices for easy plug and play installation. In addition, the FVR1000 receiver modems can be ordered as circuit card modules (See Chart Above) for installation in the Model FVC14 rack-mount chassis. The 14-slot chassis fits in a standard 19” rack and is offered with either 110VAC or 220VAC power supplies. The dimensions of the FVT1000 and FVR1000 standalone devices are 7.5in (L) x 6.
ENVIRONMENTAL MTBF Operating Temp: Storage Temp: Relative Humidity: Size: >100,000 hours -30˚C to +50˚C -40˚C to +85˚C 0% to 95% (non condensing) 19 x 16 x 3.2 cm 7.5 x 6.3 x 1.2 in. Shipping Weight: Construction: Finish: <4.
SECTION 2 INSTALLATION INSTRUCTIONS INSTALLATION PROCEDURE The VersiVision FVT1000 Series transmitters and receivers are preset for immediate use. There are indicator LEDs on the units for monitoring the real-time status of video, and power. The following instructions describe the typical installation procedure and the function of the LED indicators located on each unit. 1. Connect the video source (camera) to the video input BNC connector on the FVT1000 transmitter unit using coaxial cable. 2.
SECTION 3 TROUBLESHOOTING OPTICAL FIBER The VersiVision FVT1000 and FVR1000 Series fiber optic video modems are available for applications using multimode or singlemode optical fibers. Please be certain that the correct size and type of fiber is being used for the particular mode transmitter/receiver combination. Also be certain that the attenuation and bandwidth of the fiber optic cable being used is within the range of the system’s loss budget specifications.
FIGURE 3: VersiVision FVT100x/FVR100x Connection Layout 9