User Manual

Page 103GX2000/GX2150
14.2 ADDING A WAYPOINT
1. Press and hold down the key until
“Setup Menu” appears.
2. Rotate the CHANNEL knob to select
“WAYPOINT SETUP”.
3. Press the soft key, then select “WAYPOINT
DIRECTORY” with the CHANNEL knob.
4. Press the soft key, then select “ADD”
with the CHANNEL knob.
5. Press the soft key.
6. Enter the Waypoint Name, by rotating the
CHANNEL knob to select the first letter.
7. Press the soft key to store the first
letter and to move to the second letter in the
name.
8. Repeat step 5 and 6 until the name is shown.
Press the soft key to skip a letter if needed.
9. Press and hold the soft key, then enter the coordinates of the
waypoint POSITION, by rotating the CHANNEL knob to select the first
digit in the Latitude.
10. Press the soft key to store the first number
and to move to the second number in the position.
11. Repeat step 9 and 10 until the latitude is shown in-
clude N or S in the last digit.
12. Press the soft key to select the first digit of
the Longitude is blinking.
13. Rotate the CHANNEL knob to select the first digit in
the Longitude.
14. Press the soft key to store the first number
and to move to the second number in the position.
15. Repeat step 13 and 14 until the Latitude is shown
include E or W in the last digit.
16. After all information is entered, press and hold the
soft key to store the waypoint into memory.
17. Press the soft key several times to return to radio operation.