User Manual

Page 105GX2000/GX2150
14.5 SAVING A DSC POSITION CALL AS A WAYPOINT
When a position is received from a another DSC radio the GX2000/GX2150
allows the position to be saved as a waypoint.
1. After a position has been received, press the
soft key two times.
2. The first digit in the WPT Name will be flash-
ing, rotate the CHANNEL knob to the first let-
ter of the name you want to input.
3. Press the soft key, then rotate the CHAN-
NEL knob to select the second letter in the name.
4. Repeat step 3 until the name is shown.
5. Press and hold the soft key until the radio
beeps to save the waypoint to memory.
6. Press the soft key several times to return to radio operation.
14.6 NAVIGATING TO A SAVED WAYPOINT
1. Press and hold down the key until
“Setup Menu” appears.
2. Rotate the CHANNEL knob to select “GEN-
ERAL SETUP”.
3. Press the soft key, then select “DIS-
PLAY” with the CHANNEL knob.
4. Press the soft key, and select
“WAYPOINT”, and press the soft key.
5. Select the waypoint name and press the
soft key to show the waypoint data
display.
6. Press the soft key to start navigating
the waypoint and show the Waypoint Nav display.
NOTE
The radio must be connected to a GPS to be able to navigate to a
waypoint.