User Manual

GX2000/GX2150Page 52

desired number and move one space to the right by

pressing the soft key. Repeat this procedure

until all nine space of the MMSI number are entered.

11. If a mistake was made entering in the MMSI number

repeat pressing the soft key until the wrong number is selected,

then rotate the CHANNEL knob to correct the entry.

12. To store the data entered, press and hold the soft key.

13. To enter another individual address, repeat steps 5 through 12.

14. Press the soft key several times to return to radio operation.

9.5.2 Individual Reply Setup

This menu item sets up the radio to automatically (default setting) or manually

respond to a DSC Individual call requesting you to switch to a working channel

for voice communications. When Manual is selected the MMSI of the calling

vessel is shown allowing you to see who is calling. This function is similar to

caller id on a cellular phone.

1. Press and hold down the key until

“Setup Menu” appears.

2. Rotate the CHANNEL knob to select “DSC

SETUP” menu.

3. Press the soft key, then select “INDI-

VIDUAL REPLY” with the CHANNEL knob.

4. Press the soft key.

5. Rotate the CHANNEL knob to select “AUTO-

MATIC” or “MANUAL”.

6. Press the soft key to store the selected set-

ting.

7. Press the soft key several times to return to radio operation.

9.5.3 Individual Acknowledgment Setup

The radio can be setup to transmit a reply automatically (default) or set so the

radio will not reply to an individual call.