User Manual

Page 69GX2000/GX2150
5. Press the soft key to send your posi-
tion to the selected vessel.
6. Press the soft key to return to radio
operation.
9.9.2.2 DSC Position Report Call manually entering a MMSI
This feature allows you to send your position to another vessel by manually
entering the MMSI of the ship you want to send your position to.
1. Press the key. The “DSC Menu” will
appear.
2. Rotate the CHANNEL knob to select “POS RE-
PORT”. (To cancel, press the soft key.)
3. Press the soft key. The transceiver will beep,
and the “Position Report Call” menu will appear.
4. Rotate the CHANNEL knob to select
“MANUAL”, then press the soft key.
5. Rotate the CHANNEL knob to select the first
number of the MMSI which you want to con-
tact, then press the soft key to step to
the next number.
6. Repeat step 5 to set the MMSI number.
7. If a mistake was made entering in the MMSI
number, repeat pressing the soft key
until the wrong number is selected, then ro-
tate the CHANNEL knob to correct the entry.
8. When finished entering the MMSI number,
press and hold the Press the soft key.
9. Press the soft key to send your posi-
tion to the selected vessel.
10. Press the soft key to return to radio operation.