User Manual

GX2000/GX2150Page 88
11 CHANNEL FUNCTION SETUP
11.1 CHANNEL GROUP
This section selects a channel group from USA, Canada, and International.
1. Press and hold down the key until
“Setup Menu” appears.
2. Rotate the CHANNEL knob to select “CH
FUNCTION SETUP”.
3. Press the soft key, then rotate the
CHANNEL knob to select “CH GROUP”.
4. Press the soft key.
5. Rotate the CHANNEL knob to select desired
channel group “USA”, “INTL”, or “CANADA”.
6. Press the soft key to store the selected set-
ting.
7. Press the soft key several times to return to radio operation.
11.2 SCAN MEMORY
To be able to scan channels the radio must be programmed. This section al-
lows channels to be stored in scan memory.
1. Press and hold down the key until “Setup
Menu” appears.
2. Rotate the CHANNEL knob to select “CH FUNCTION
SETUP”.
3. Press the soft key, then rotate the CHAN-
NEL knob to select “SCAN MEMORY CH”.
4. Press the soft key.
5. Rotate the CHANNEL knob to select a desired chan-
nel to be scanned, the press the key. “MEM”
icon appears on the display, which indicates the
channel has been selected to the scan channel.
6. Repeat step 5 for all the desired channels to be
scanned.
7. To DELETE a channel from the list, select the chan-
nel then press the key. “MEM” icon disap-
pears from the display.
8. When you have completed your selection, press the soft key sev-
eral times to return to radio operation.