User Manual

Page 93GX2000/GX2150
11.9 DEMO MODE
This mode is used by Standard Horizon sales persons and dealers to demon-
strate radio, DSC and AIS functions in show rooms or at boat shows. Demo
mode allows Latitude, longitude and time to be entered to simulate radio dis-
plays. When DEMO mode is enabled, the radio display will automatically switch
from NORMAL, COMPASS, AIS and WAYPOINT displays.
NOTE
When demo mode is enabled and the radio is turned off and back on the
radio will still be in DEMO mode.
1. Press and hold down the key until
“Setup Menu” appears.
2. Rotate the CHANNEL knob to select “DEMO
MODE”.
3. Press the soft key, then select “POS INPUT”
with the CHANNEL knob.
4. Press the soft key.
5. Enter the latitude/longitude of your vessel and
your local UTC time in the 24-hour notation
by the CHANNEL knob. Rotate the CHAN-
NEL knob to select the number and press the
soft key to move the cursor to the next
character. You may backspace the cursor by
pressing the soft key, if you make a
mistake.
6. To store the data entered, press and hold the
soft key.
7. Rotate the CHANNEL selector knob to “DEMO
START” and press the soft key.
8. Select “START” using the CHANNEL selector knob and press the
soft key.
NOTE
To stop DEMO mode, perform steps above, in step 8 select “STOP”.