Instructions / Assembly

Stander
®
Live the longer life you love®
Tel: [phone] ▲ Fax: [phone] ▲ 74 Canterbury Cir ▲ Logan, UT 84321 ▲ Stander.com ▲ [e-mail]
CouchCane Assembly Instruction Sheet
Parts List:
Step 1:
Pivot Upright stationary tube into the vertical position as shown in Figure 1 and insert the
Upright bolt through the large hole in the plastic cover located at the base of the Upright
stationary tube and tighten the Upright bolt with the Allen head wrench.
Figure 1
Figure 2
Step 2:
To properly assemble the Handle assembly into the Upright stationary tube, the Handle
assembly bushing must be fully inserted into the Upright stationary tube.
This can be accomplished by fully inserting the Handle assembly so that the Spring
loaded button moves past all of the holes in the Upright stationary tube.
Continue to push down on the Handle assembly until it forces the Handle assembly
bushing to fully engage the Upright stationary tube.
After the Handle assembly bushing is properly installed, adjust the height of the Handle
assembly to the desired height by pressing the Spring loaded button and moving the
Handle assembly up or down.