Instructions / Assembly

Step 3:
Place the assembled product along side of the couch or chair that you plan to use.
Adjust the Base adjustment tube to the appropriate length such that the furniture legs of
the couch or the chair are centered on the rubber pads of both the Base adjustment tube
and the Base stationary tube as shown in Figure 4 and Figure 5.
Figure 4
Step 4:
Make sure the Base Stationary Tube and Base Adjustment Tube are appropriately spaced
such that the Furniture legs are centered front to back on the Product base rubber pads as
shown below in Figure 5.
Figure 5
Note: Furniture legs of a chair or couch should be centered on the product base rubber
pads AND positioned as close as possible to base stationarly tube and base adjustment
tube.