Brochure

ManualsBrandsStandex-Meder ManualsHall & Reed SensorsReed Sensor 1CO 10W 500mA

218

MEDER electronic

www.meder.com

Reed Sensors

for Screw Fastening

DESCRIPTION

MK04 sensors are magnetically operated Reed

proximity switches designed for screw mounting.

The sensor should be mounted on a xed surface

with the actuating magnet on the moving surface.

Introduction or removal of the magnetic eld

determines the closing and opening of the Reed

Switch.

APPLICATIONS

• Position and limit switch

Pneumatic or hydraulic actuator position

indication and end travel limit switch

• Door and window contacts

Security system applications

• Level sensor

Use with magnetic oats for water level

detection in coffee makers, washing

machines or dishwashers

DIMENSIONS

All dimensions in mm [inch]

FEATURES

Form A, B, and C available

High power switches available

Other cables, connectors and colors available

Various case sizes available

Five operate sensitivities available

A choice of cable terminations and lengths are

available

High voltage versions upon request

•

MK04 Series

Summary of content (4 pages)

PAGE 1
MK04 Series MEDER electronic Reed Sensors for Screw Fastening DESCRIPTION MK04 sensors are magnetically operated Reed proximity switches designed for screw mounting. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch.
PAGE 2
MEDER electronic MK04 Series Reed Sensors for Screw Fastening ORDER INFORMATION Part Number Example MK04 - 1A66 C - 500 W 1A is the contact form 66 is the switch model C is the magnetic sensitivity 500 is the cable length (mm) W is the termination Series Contact form Switchmodel Magnetic Sensitivity Cable Length (mm) Termination MK4 - XX XX X- XXX X 1 Form A 66 B, C, D, E 1 Form B 1 Form C 500* W 90 Options * Other cable length available.
PAGE 3
MEDER electronic MK04 Series Reed Sensors for Screw Fastening CONTACT DATA Switch Model → Contact Form → All Data at 20° C Contact Ratings Conditions Switch 66 Form A Min. Typ. Max. Units Switching Power Any DC combination of V & A not to exceed their individual max.‘s 10 W Switching Voltage DC or peak AC 200 V Switching Current DC or peak AC 0.5 A Carry Current DC or peak AC 1.25 A Static Contact Resistance w/ 0.5 V & 10mA 150 mΩ Dynamic Contact Resistance Measured w/ 0.
PAGE 4
MEDER electronic MK04 Series Reed Sensors for Screw Fastening CONTACT DATA Switch Model → Contact Form → All Data at 20° C Contact Ratings Conditions Switch 90 Form B / C Min. Typ. Max. Units Switching Power Any DC combination of V & A not to exceed their individual max.‘s 20 W Switching Voltage DC or peak AC 175 V Switching Current DC or peak AC 0.5 A Carry Current DC or peak AC 1.0 A Static Contact Resistance w/ 0.5 V & 10mA 150 mΩ Dynamic Contact Resistance Measured w/ 0.