Datasheet

ManualsBrandsStandex-Meder ManualsHall & Reed SensorsReed Sensor 1CO 3W 250mA

DESCRIPTION

MK12 sensors are magnetically operated Reed

Sensors designed for screw mounting. The larger

casing permits the use of higher rated switches.

The sensor should be mounted on a fixed surface

with the actuating magnet on the moving surface.

Introduction or removal of the magnetic field

determines the closing and opening of the Reed

Switch.

APPLICATIONS

MEDER electronic MK12 Series

Reed Sensors with Screw

Fastening Mounting Holes

• Position and limit switch

Pneumatic or hydraulic actuator position

• End motion detection for linear drive

Indication and end travel limit switch

• Machine industry

End motion detection and door/flap control

All dimensions in mm [inches]

DIMENSIONS

FEATURES

• Form A, B, and C available

• High power switches available

• Other cables, connectors and colors available

• Various case sizes available

• Five operate sensitivities available

• A choice of switch terminations and cable

lengths are available

www.meder.com

Germany # ++49-(0)7733-94870, USA # 800-870-5385

Summary of content (4 pages)

PAGE 1
MEDER electronic MK12 Series Reed Sensors with Screw Fastening Mounting Holes DESCRIPTION MK12 sensors are magnetically operated Reed Sensors designed for screw mounting. The larger casing permits the use of higher rated switches. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch.
PAGE 2
MK12 Series MEDER electronic Reed Sensors with Screw Fastening Mounting Holes ORDER INFORMATION Part Number Example SERIES CONTACT FORM SWITCH MODEL MAGNETIC SENSITIVITY CABLE LENGTH (mm) TERMINATION MK12 - XX XX X - XXX X 71 B, C, D, E 81 A 500 * W, X, Y 1 Form A OPTIONS 84 1 Form B 1 Form C MK12 - 1A71 C - 500 1A is the contact form 71 is the switch model C is the magnetic sensitivity 500 is the cable length (mm) W is the termination C, D, E 90 * Other cable lengths available.
PAGE 3
MEDER electronic MK12 Series Reed Sensors with Screw Fastening Mounting Holes CONTACT DATA Switch Model --> Contact Form --> All data at 20 0 C Contact Ratings Conditions Contact 71 Form A Min. Typ. Max. Contact 81 Form A Min. Typ. Max. Units Contact Rating Any DC combination of V & A not to exceed their individual max.'s 10 5 W Switching Voltage DC or peak AC 200 90 V Switching Current DC or peak AC 0.5 0.5 A Carry Current DC or peak AC 1.25 1.
PAGE 4
MK12 Series MEDER electronic Reed Sensors with Screw Fastening Mounting Holes CONTACT DATA Switch Model --> Contact Form --> All data at 20 0 C Contact Ratings Conditions Contact 84 Form A Min. Typ. Max. Contact 90 Form B / C Min. Typ. Max. Units Contact Rating Any DC combination of V & A not to exceed their individual max.'s 10 3 W Switching Voltage DC or peak AC 400 175 V Switching Current DC or peak AC 0.5 0.25 A Carry Current DC or peak AC 1.0 1.