Instructions / Assembly

Assembly Instructions
Model No. 11011034BLK
Page 2
STEP 1
STEP 2
STEP 3
Use the mounting screws to attach
the mounting unit to the junction
box.
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the pre-installed
green ground screw. Then, connect the positive, negative, and
ground wires with the supplied wire nuts. Secure with electrical
tape.
Place the canopy over the Mounting Unit and secure
the fixture with the Cap Nuts.
STEP 4
Unscrew the Socket Rings.
STEP 6
Install bulb(s) (not included)
(4) E26 Type A, Max Watt 60W
STEP 5
Install the Glass Shades.