The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Definitions: Safety Guidelines WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool.
English POWER TOOL USE AND CARE a) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. b) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
personnel may result in injury. To locate your nearest DEWALT service center call 1-800-4-DEWALT (1-800-433-9258) or go to http://www.dewalt.com on the Internet. • Do not disassemble the inspection camera. There are no user serviceable parts inside. • Do not allow the inspection camera cable to come in contact with live wires. Shut off circuit breakers to the entire area to avoid injury. • Do not use on humans or animals. This is not for human or animal use and can cause injury if used.
English illegal to place spent nickel cadmium, nickel metal hydride or lithium ion batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative. RBRC™ in cooperation with DEWALT and other battery users, has established programs in the United States and Canada to facilitate the collection of spent nickel cadmium, nickel metal hydride or lithium ion batteries.
Minimum Gauge for Cord Sets Volts Total Length of Cord in Feet (meters) Ampere Rating 120V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7) 240V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4) More Not More AWG Than Than 0 6 18 16 16 14 6 10 18 16 14 12 10 12 16 16 14 12 12 16 14 12 Not Recommended • Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source.
elicits the same trouble indication as the original, have the charger tested at an authorized service center. English Chargers Your tool uses a DEWALT charger. Be sure to read all safety instructions before using your charger. Consult the chart on the back cover of this manual for compatibility of chargers and battery packs.
2. The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer. 3. If the battery pack does not charge properly: a. Check operation of receptacle by plugging in a lamp or other appliance; b.
FIG. 2 Power indicator for the handle set: When the green light is on it indicates that the handle set is on. R. H D E English S. Reset button FIG. 3 R J K L M F S G I C B Q A L. Record: Press this button for recording. M. Camera: Press this button for taking a photo. N. Main Menu: Press this button to show a list of options for the operating the inspection camera O. Back Arrow: Press this button to the previous screen. P. OK: Press this button to save changes. Q.
The inspection camera is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. FIG. 4 When the screen is attached to the handle set with a battery, it will receive a charge from the battery. Ensure the screen is fully charged before use. To install the screen (E) into the handle set (G), align the screen with the rails on the handle set and slide it firmly into the handle until you hear the lock snap into place.
English IMPORTANT: When attaching or FIG. 7 removing the belt hook, use only the screw (W) that is provided. X The belt hook (X) can be be attached to either side of the W tool using only the screw (W) provided, to accommodate left- or right- handed users. If the hook is not desired at all, it can be removed from the tool. To move belt hook, remove the screw (W) that holds the belt hook in place then reassemble on the opposite side.
To Change Date/time 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select Date/Time option. 5. Repeat above steps to change remaining fields. 6. Press the main menu button to exit. English BASIC OPERATION NOTE: At any time during the camera operation, pressing the main menu button will return to the previous menu. To Change Languages 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select the Language option. 3.
To Activate the Time Stamp 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select the Time Stamp option. English 2. Press the forward or back arrow to select the Format Disk option. 3. Press the OK button to navigate to the next screen. 4. Press the forward or back arrow to select NO or YES. 3. Press the OK button to navigate to the next screen. 4. Press the forward or back arrow to select OFF or ON. 5. Press the OK button to save changes and exit.
3. Press the OK button to navigate to the next screen. 4. Press the forward or back arrow to select NO or YES. 4. Press the forward or back arrow to select the photo or video. English 5. Press the OK button to view photo or video. 5. Press the OK button to save changes and exit. To View Photos or Videos 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select the Folder option. 6. Press the forward or back arrow to advance to the next the photo or video. 7.
3. Press the forward or back arrow to select a dated folder to be deleted. 4. Press the delete button. Select YES to delete ENTIRE folder. 4. Press the OK button to navigate to the next screen. 5. Press the forward or back arrow to select a photo or video. English 3. Press the forward or back arrow to select a dated folder to be deleted. 5. Press the main menu button to exit. To Delete Individual Photos or Videos: 1. Press the main menu button to show the Main Menu. 2.
To Delete a Photo or Video While Viewing 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select the Folder option. 6. Press the OK button to view. English 7. Press the delete button. Select YES to delete the individual photo or video. 3. Press the forward or back arrow to select a dated folder. Operating Tips • Use only DEWALT 12V Max* lithium ion battery. • Ensure the DEWALT battery is in good working condition.
English Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-DEWALT (1-800-433-9258) or visit our website www. dewalt.com. WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool.
SPECIFICATIONS Light Source Laser Wavelength Laser Power Temperature Range Field of View Accuracy Emissivity Power Source In addition to the warranty, DEWALT tools are covered by our: 1 YEAR FREE SERVICE DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.
FCC ID: YJ709472-81539 IC: 9082A-0947281539 Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.