User's Manual

English

OPERATION

Installing and Removing the Battery Pack

(Fig.10)

NOTE: Make sure your battery pack is fully charged.

To install the battery pack (A) into the tool handle, align the battery with

the rails inside the tool’s handle and slide it firmly into the handle until

you hear the lock snap into place.

FIG. 10

To remove the battery pack from the tool, press the release button (BB)

and firmly pull the battery pack out of the tool handle. Insert it into the

charger as described in the charger section of this manual.

Getting Started

INITIAL SETUP

Language Setup

1. Press the forward or back arrow to select English, French or

Spanish.

2. Press the OK button to confirm and exit.

Date and Time Setup

1. Press the forward or back arrow to highlight the field to change.

2. Press the OK button to activate the field (field turns green).

3. Press the forward or back arrow to change the activated field.

4. Press the OK button to save changes (field turns yellow).

5. Repeat above steps to change remaining fields.

6. Press the main menu button to exit.

BASIC OPERATION

NOTE: At any time during the camera operation, pressing the main

menu button will return to the previous menu.

To Record Photos or Videos

Be sure a micro SD card (sold separately) is loaded in the card slot (H).

1. Turn both the camera (B) and the handle set (G) on.

2. Aim camera at destination.