User Manual

1-800-628-8810
11
High And Low Pressure Point Alarms
ADVANCED
SETTINGS
1. Hold down Function button to open menu.
2. Press Function button to navigate to H Po or L Po submenu.
3. Press arrow button to scroll through desired alarm.
4. Hold down Function button to save and exit.
To set high and low alarm values:
Backlight
1. Hold down Function button to open menu.
2. Press Function button to scroll to the BL submenu.
3. Use arrow buttons to select backlight condition: ON, 1 minute, 5 minute,
10 minute, or OFF.
4. Hold down Function button to save and exit.
5. Note – while the backlight is ON, press the SYNC button to toggle on or off
from the home screen.
To adjust backlight settings:
Sound
1. Hold down Function button to open menu.
2. Press Function button to scroll to the BEEP submenu.
3. Use arrow buttons to select ON or OFF.
4. Hold down Function button to save and exit.
To turn sound on/o: