User Manual

1-800-628-8810
5
Install batteries into Handheld Display and Remote Sensor.
Power On Handheld Display and Remote Sensor.
Handheld Display and Remote Sensor will sync automatically:
observe reading on Handheld Display.
Connect Remote Sensor to Valve Core Removal Tool or Refrigerant
Hose using Female-Female Adaptor if needed.
Pull vacuum to desired vacuum reading.
Quick Change-Out Guide for Replacement Sensor:
Purchase the hilmor® Wireless Vacuum Gauge Replacement Sensor.
Unscrew the 2 flathead screws on the back of the Remote Sensor.
Disconnect the 2 white plugs that connect the Remote Sensor
to the Replacement Sensor.
Plug in the new Replacement Sensor and gently tuck the wires into
the Remote Sensor body.
Screw the door back on to the Remote Sensor to secure the
Replacement Sensor.
Turn on the Handheld Display to automatically sync.
QUICK START GUIDE