User's Manual

73
8 Click the ellipsis button next to the Update Interval field. Here you can set how
often the system will update the Portal Gateway with changes you’ve made to
users, readers, timezones, and other functional changes to the database.
9 Click the ellipsis button next to the Transactions field to select which, if any, Portal
Gateway transactions you want to enable and which you want to make a ‘priority.’
Priority transactions will be uploaded immediately rather than waiting for the next
‘update interval’ that was set in the field above. Two transactions are available:
 Portal Firmware Update
 Portal Radio Start Failed
If you click on Select All, a dialog box window will ask you to confirm your
choice and it will also ask if you would like to enable priorities as well.
10 If you generated SSL certificates within the Portal Configuration module, you
may browse to your Portal Gateway’s certificate by clicking on the ellipsis
button next to the SSL Certificate field. The Certificate can be found in your
Program Files at the path shown below (Figure 46). The file is located within a
folder named for the Portal Gateway’s IP address. Select the file with the .pfx
extension, and click Open.
Figure 46 Path to Certificate File
11 Click Finish.
The Portal(s) you have added will now be visible in the Segment Tree. See “View-
ing the Segment Tree” on page 79. You can check the operational status of your
Portal(s) by clicking on the top folder within your Segment Tree.