User's Manual

91
Figure 63 New Reader Configuration
When you have made your selection, click OK. If you are copying reader prop-
erties, a window will open asking if you would like to proceed. Click Yes to
proceed.
Field Category Definitions
The following is a list of Reader property field categories and their functions.
Reader Name
The Reader name displays automatically. You may change it by typing over the
default name.
Associations
If you have already configured User Groups and Users, you can assign them to the
readers now. If you have not yet configured these parameters, or don’t wish to do
it now, you can come back later to add these settings.
Configuration
Under the Configuration category, you can configure various reader settings, such
as default settings for Channels, Beacon Time, Operate and Shunt times, and add
delays depending on how the reader will be used.
Assigned to Channels — New readers default to All Channels; however, you can
assign specific channels if needed. For example, if an existing wireless compo-
nent operates on Channel 17, you will want to disable Channel 17 in the reader
channel configuration. See “Assigning Reader Channels”.