User's Guide

Wireless System
85
Custom-printed cardholder’s badges also utilize the Reporting Services Engine, giving you
complete control over badge design.
Quick Setup
Follow these simple steps to get your access control up and running in minutes.
Steps
1 Login to Stanley
2 Click All Programs
3 Click Stanley to launch web browser, which will point to the TBD, running under IIS.
You will be presented with a login screen.
4 Use default username, which is admin. The default password is admin. Later in this
chapter you will learn how to change the default password.
Image-TBD
Create a Door
1 Log into the system.
2 Press ‘Conguration’ in upper right corner.. The main page in this section is the Doors
Page.
3 Click the ‘Create Doors’ in Action pane on left side of window. A pop-up window will
appear as shown in Figure XX.
Image-TBD
Choose a Door Name
1 Choose appropriate name (e.g. Front Door, Lobby Door).
2 Click the IP Address or Serial Number combo boxes to nd the IP address of your main
door.
Image-TBD
Choose a Door Type
If your door has a contact to detect the open/close status of the door, choose door type listed
as “1 or 2 Reader IN1 Normally Closed”
If your door does not have this contact, choose door type listed as “1 or 2 Reader IN1
Normally Open”
Image-TBD