User's Manual

Chapter 3: First-time B.A.S.I.S.® Offline System Configuration
3 – 4
Notes 10 Click Add.
11 Under Encoder Settings, in the name field, type a name for
the encoder.
12 In the Encoder Type field, select:
Magstripe Swipe Reader/Writer (Model 712 or 722)
13 Click Test.
Note The encoder can be tested at any time by returning to the
Encoder tab. You do not need to put the encoder in modify
mode to test the encoder.
14 Click OK.
15 Close System Administration.
Figure 3.1 Configuring the encoder
Click to test
whether the
encoder is
online