User's Manual

Chapter 3: First-time B.A.S.I.S.® Offline System Configuration
3 – 16
Notes 8 Under the Card Format section, select the Guest Card
Format.
Applica-
tion note
Selecting the ‘Offline Guest’ reader type refers to a B.A.S.I.S.
V configuration. A selection of the Offline reader type is not
recommended.
9 Make any other selections as necessary.
10 Click OK.
The Reader is listed in the Reader listing at the top
of the window.
11 Repeat steps 3 – 10 for each additional lock/reader.
Now that you have defined the reader operation of the lock/
readers, you now need to configure the software so that the
correct chassis type is assigned to the lock/reader and other
offline features are configured appropriately.
Before you can complete this section you must know:
■ Chassis type of the lock/reader. The chassis type will most
likely be either mortise or cylindrical.
■ The maximum number of cardholders that will need to
access the lock/reader. This includes both guest cardhold-
ers and those cardholders that access the reader by access
levels.
■ The number of guest badges that will be assigned from
the pool of badge IDs.