User's Manual

Chapter 3: First-time B.A.S.I.S.® Offline System Configuration
3 – 17
NotesTo define other guest reader features
1 From System Administration, click Access Control >
Readers.
2 Click the Offline tab.
3 Select the Reader that you want to define. Make sure that
the check mark is next to the reader to be modified.
4 Click Modify.
The Modify Offline Reader window displays
5 In the Chassis Type field, select the chassis type that the
lock/reader has.
Applica-
tion note
The custom chassis type enables the modification of the chas-
sis volume. The chassis volume is a value used by engineers
that relates to the number of turns of the motor that is
required to unlock the lock. Only use the custom chassis type
at the direction of a technical support engineer or specific
instructions enclosed with the lock.
6 In the Cardholders field, select the total number of
cardholders that will need to access the lock/reader.
7 In the Look Ahead section, select the look ahead offset and
range. Normally for B.A.S.I.S. G locks, the offset is set to 1
and the range to 3. For more information on guest
functionality, see page 2-4.
Figure 3.8 Defining the offline reader
Make sure
that the cor-
rect reader is
selected when
selecting
offline fea-
tures
The number of
events is auto-
matically cal-
culated based
on the amount
of lock mem-
ory and the
number of
cardholders
allocated.
The common
door feature
allows dupli-
cation of a
badge range
between locks.