User's Manual

Chapter 4: Setting up and Maintaining B.A.S.I.S.® Offline Locks

4 – 2

Notes

Programming locks

To program a B.A.S.I.S. G or B.A.S.I.S. V Lock, you need to:

 Define an access control panel and reader configuration

for the lock using B.A.S.I.S. System Administration. For

more information, see page 3-7 of this guide as well as the

B.A.S.I.S. System Administration User Guide.

 Transfer the reader configuration from the PC to the PDA.

See the next section.

 Transfer the reader configuration from the PDA to the lock.

See page 4-10.

Transferring reader configurations from the

B.A.S.I.S. PC to the PDA

After you have used System Administration to create the

reader configurations for the locks you want to program, you

can transfer the reader configurations from the B.A.S.I.S. PC

to the PDA. Perform these steps:

To transfer reader configurations from the B.A.S.I.S. PC to the PDA

1 Establish an ActiveSync connection between the PDA and

PC.

Note When ActiveSync is running, the ActiveSync icon, shown in

the taskbar on the PC’s desktop, is green.

On the PDA, make sure B.A.S.I.S. Transport is not running.

To exit Transport, see

page 4-10.

3 On the PC, launch B.A.S.I.S. System Administration and

B.A.S.I.S. Communication Server.

4 From the System Administration main menu, click View,

then System Tree. See Figure 4.1