User's Manual

Chapter 4: Setting up and Maintaining B.A.S.I.S.® Offline Locks
4 – 5
Notes
Transferring a configuration from the PDA to a lock
The sections below provide instructions for sending a panel/
reader configuration to a B.A.S.I.S. G or B.A.S.I.S. V Lock.
To connect the PDA to a lock
See Figure 4.4 and perform these steps:
1 Connect the serial cable to the PDA.
2 Connect the serial cable to the programming cable.
3 Connect the programming cable to the lock’s
communication port. The connector snaps into place.
Figure 4.4 Connecting the PDA to a lock
PDA
Serial cable
Programming
cable
Communication
port