User's Manual

Chapter 4: Setting up and Maintaining B.A.S.I.S.® Offline Locks
4 – 9
Notes
If you are updating the configuration for the lock:
1 Enter the lock’s password in the Enter Password field.
For instructions to use the PDA’s virtual keyboard, see the
documentation provided with the PDA.
Note The password for a lock is the password programmed for the
reader in the virtual access control panel. You must enter the
password exactly as it was entered in the Password field on
the Offline Lock form in the Access Panels folder. Capitaliza-
tion must be the same. The default password is ‘BEST.’
If the lock has a dual validation reader (with keypad):
■ To keep the user PINs already programmed, place a check
in the Preserve user pins checkbox.
■ Or, to reprogram the lock with the PINs stored in B.A.S.I.S.,
remove the check from the Preserve user pins checkbox.
Caution If users have reprogrammed their PINs at the lock and you do
not preserve the user PINs, users will no longer be able to
access the lock.
Figure 4.8 Disconnecting the programming cable 
from the lock
Button on the
programming cable connector