User's Manual

Chapter 4: Setting up and Maintaining B.A.S.I.S.® Offline Locks
4 – 10
Notes To manually change the PIN in a B.A.S.I.S. dual validation lock
If you must use your card and PIN to unlock the door during
some or all time periods, change your PIN periodically for
added security. You can change your PIN only during a time
period when both your card and PIN are required to unlock
the door. For more information about changing a lock’s mode,
see page 4-17.
Caution Do not write your PIN on your card or in a place where some-
one might see it.
1 Use your card at the lock.
2 From the lock keypad, immediately enter:
* + your current PIN + #
The red light remains on, indicating that you can
change your PIN.
3 Immediately enter:
your new PIN + #
4 Immediately re-enter:
your new PIN + #
The green light flashes to indicate that you success-
fully changed your PIN.
Note If you make a mistake re-entering your new PIN, three short
tones sound and the red light turns off. Start over with step 1
and use your old PIN for step 2.
Example of
changing
your PIN
1 Use your card.
2 Enter * 1 2 3 4 #
3 Enter * 4 3 2 1 #
4 Re-enter * 4 3 2 1 #
To exit B.A.S.I.S. Transport
 From the B.A.S.I.S. Transport Main window on the PDA,
tap View, then Exit.