User's Manual

Chapter 4: Setting up and Maintaining B.A.S.I.S.® Offline Locks
4 – 12
Notes Note The password for a lock is the password programmed for the
reader configuration’s access control panel. You must enter
the password exactly as it was entered in the Password field
on the Offline Lock form in the Access Panels folder. Capitali-
zation must be the same.
6 Tap OK.
A message appears stating, “Attempting
login . . . Please swipe a card . . . .”
7 Use the temporary operator card to activate the lock.
The lock begins transferring its history records to
the PDA.
On the PDA, watch the messages indicating the
progress of the transfer.
When the transfer is complete, a message appears
indicating the number of history records that were
transferred. See Figure 4.10.
8 Tap OK.
9 To return to the Main window, tap View, then Main.
10 To disconnect the PDA from the lock, press the button on
the programming cable connector and unplug the
programming cable from the lock’s communication port.
See Figure 4.8 on page 4-9.
You can view the history records only after they have been
transferred from the PDA to the PC. You cannot view the his-
tory records on the PDA.
Figure 4.10 History transfer completed message