User's Manual

Chapter 4: Setting up and Maintaining B.A.S.I.S.® Offline Locks
4 – 16
Notes To view diagnostics information
1 Connect the PDA to the lock. See page 4-5.
2 Start B.A.S.I.S. Transport. See page 4-6.
3 From the B.A.S.I.S. Transport Main window on the PDA,
tap View, then Diagnostics.
The Diagnostics window appears, with the fields
blank.
4 Tap Diagnostics, then Connect.
The Login window appears.
5 Enter the lock’s password in the Enter Password field.
For instructions to use the PDA’s virtual keyboard, see the
documentation provided with the PDA
Note The password for a lock is the password programmed for the
reader configuration’s access control panel. You must enter
the password exactly as it was entered in the Password field
on the Offline Lock form in the Access Panels folder. Capitali-
zation must be the same.
6 Tap OK.
A message appears stating, “Attempting login . . .
Please swipe a card . . . .”
7 Use the temporary operator card to activate the lock.
The diagnostics information appears on the PDA, as shown in
Figure 4.11 on page 4-14.
Note To perform other activities while connected to the lock, see:
■ “Changing a lock’s online mode” on page 4–17
■ “Unlocking a door temporarily” on page 4–18
■ “Resetting the use count” on page 4–19
■ “Clearing the diagnostics code” on page 4–20.
8 When you have finished using diagnostics features, tap
Diagnostics, then Disconnect.
The PDA closes communications with the lock.
9 To return to the Main window, tap View, then Main.
10 To disconnect the PDA from the lock, press the button on
the programming cable connector and unplug the
programming cable from the lock’s communication port.
See Figure 4.8 on page 4-9.