User's Manual

Chapter 4: Setting up and Maintaining B.A.S.I.S.® Offline Locks
4 – 18
Notes To change a lock’s online mode, perform these steps:
1 If you are already viewing diagnostics information for the
lock, go to Step 2.
If you are not viewing diagnostics information for the lock,
perform Step 1 through Step 7 on page 4-16.
2 From the B.A.S.I.S. Transport Diagnostics window on the
PDA (Figure 4.11 on page 4-14), tap Diagnostics, then Set
Online Mode, then the mode that you want.
A confirmation message appears.
3 Select OK.
4 When you have finished using diagnostics features,
perform Step 8 through Step 10 on page 4-16.
Unlocking a door temporarily
You can use the PDA to unlock a door for the default duration
programmed for a lock. This feature is useful when you need
to access the inside of the door to replace the lock’s batteries
or perform other maintenance for the lock.
To unlock a door temporarily, perform these steps:
1 If you are already viewing diagnostics information for the
lock, go to Step 2.
If you are not viewing diagnostics information for the lock,
perform Step 1 through Step 7 on
page 4-16.
2 From the B.A.S.I.S. Transport Diagnostics window on the
PDA (Figure 4.11 on page 4-14), tap Diagnostics, then
Unlock Once.
A confirmation message appears asking, “Unlock
once?”
3 Select OK.
The lock unlocks for the default duration pro-
grammed for the lock, letting you open the door.
4 When you have finished using diagnostics features,
perform Step 8 through Step 10 on page 4-16.