User's Manual

Chapter 4: Setting up and Maintaining B.A.S.I.S.® Offline Locks
4 – 19
Notes
Resetting the use count
Every B.A.S.I.S. G and B.A.S.I.S. V Lock counts the number of
times access is granted to a card or PIN since the use count
was last reset. You can use this count to track how often a lock
is used during a selected time frame.
To reset the use count for a lock
1 If you are already viewing diagnostics information for the
lock, go to Step 2.
If you are not viewing diagnostics information for the lock,
perform Step 1 through Step 7 on page 4-16.
2 From the B.A.S.I.S. Transport Diagnostics window on the
PDA (Figure 4.11 on page 4-14), tap Diagnostics, then
Reset, then Use Count.
A confirmation message appears asking, “Reset use
count?”
3 Select OK.
The lock’s use count is reset to 0.
4 When you have finished using diagnostics features,
perform Step 8 through Step 10 on page 4-16.